The water supply line and a blue-handled shutoff valve on the wall behind a stainless ice machine, a clear filter housing on the line above the ice machine's inlet.

Marvel nugget ice machine blinking NO WATER (Er15): no water reached it

Marvel's nugget models fill a reservoir that feeds the freezing drum.

(844) 410-9163

Mon–Sat, 8am–8pm

  • Water supply
  • Ice machine water valve and filter repair
  • Source: Marvel

Book a visit

Three short steps, about a minute.

or call (844) 410-9163

What Er15
actually means.

Marvel's nugget models fill a reservoir that feeds the freezing drum. If the level sensor sees no water for two minutes, NO WATER blinks and Er15 is set. Marvel's action is to check supply pressure and the level sensor before restarting.

Marvel ice machine display · also shown as NO WATER lamp blinking

What to do when Er15 shows on the ice machine

Before you book,
in this order.

Each step comes from Marvel's own guidance for Er15 on its ice machines. Follow it to the end: the last card says whether this is a visit.

01

Open the valve that feeds the machine and check the supply tubing behind it for a pinch.

02

Check the pressure at the connection if other fixtures on the same line are weak.

03

Restart the machine; if NO WATER keeps blinking, book a visit for the sensor and inlet valve.

Still there?

It usually turns into ice machine water valve and filter repair. Book with the code and the model number.

What not to do

A NO WATER lamp that is lit steady is only reporting low supply at that moment. When it blinks alongside ICE or DRAIN, the pattern points to a sensor instead.

What you may
notice with it.

The ice machine problems Er15 tends to arrive with. Answer these at the ice machine before anyone is booked.

All problems

Where Er15 usually leads

Ice machine water valve and filter repair.

Inlet valve, sump float or level probe, supply line and filter head · low to moderate.

In Marvel's own words

When water level is not detected by the water level sensor due to no water supply for 2 minutes. (Er15)
Marvel MRNP215 nugget ice machine owner's guide and service manual Marvel MRNP215 nugget ice machine owner's guide and service manual

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Marvel nugget ice machines MRNP215, MONP215 and MANP415, which report through ICE, NO WATER and DRAIN lamps.

Marvel Er15 ice machine repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A family filling glasses with nugget ice from an ice machine in a large home kitchen.
For the heart of your home.

Questions
about Er15.

Can I clear Er15 myself?
Open the valve that feeds the machine and check the supply tubing behind it for a pinch. If it comes back, it needs a visit.
My Marvel nugget machine was just installed and NO WATER is blinking. What is wrong?
Often the supply valve was left closed or the line has air in it. Open the valve and restart.
Is Er15 on a Marvel the same as a clogged filter?
A clogged inline filter can cause it, since it starves the fill. Change the filter if one is fitted.
Does Marvel need a service visit for Er15?
Only if water is reaching the machine at good pressure and the lamp still blinks.

Back to your everyday

Still showing Er15?

A booking with a code goes further when it carries the light or code copied as it appeared, the model and serial off the data plate, and a word on whether cubes still fall into the bin. With those three in hand, our office can match the probable part to your machine the same afternoon.

(844) 410-9163 Schedule a repair